New member with lots of questions.

View previous topic View next topic Go down

New member with lots of questions.

Post  jdh21 on Wed Jul 22, 2009 2:48 am

Hi,

My name is Jeremey. I'm fairly new to making laminar fountains & I have a lot of questions. I've built a handfull of prototypes & they seem to have worked out well (for the most part). My primary problem at the moment is trying to illuminate the stream. I've seen many different products (most of them expensive), but I don't understand how they will light up the stream without disrupting the flow. I have tried multiple methods with various homemade apparatus, but with very limited success. If anyone has any tips or suggestions I would be most grateful. Thanks. - JDH21

jdh21
Nozzle Newbie
Nozzle Newbie

Posts : 1
Join date : 2009-07-21

View user profile

Back to top Go down

Re: New member with lots of questions.

Post  John on Wed Jul 22, 2009 11:20 am

Hey, Welcome!

There are some good suggestions on how to build the lighting here. Why don't you start a thread in the "Laminar Nozzle Talk and pictures" forum.
avatar
John
Nozzle Master
Nozzle Master

Posts : 450
Join date : 2009-04-03
Age : 39
Location : Utah

View user profile http://www.mad-laboratory.com

Back to top Go down

Re: New member with lots of questions.

Post  liteglow on Thu Jul 23, 2009 5:01 am

Hi and welcome to this forum :-)
Glad that you did join us here..

About the light, you must check out the pictures from mario nozzle.
I think he have done the best work about lightning !
avatar
liteglow
Admin

Posts : 516
Join date : 2009-04-02
Age : 35
Location : Norway

View user profile http://laminar.forumotion.com

Back to top Go down

Re: New member with lots of questions.

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum