The Laminar Project Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

air in the nozzle

2 posters

Go down

air in the nozzle Empty air in the nozzle

Post  elbii Wed Aug 18, 2021 8:36 am

hi friends, i have a problem with air in the nozzle, what can i do? a low pass filter is installed. i need a valve or vent, but what and where i have it to be installed ? best regards mike

elbii
Nozzle Newbie
Nozzle Newbie

Posts : 3
Join date : 2021-08-18
Location : cologne germany

Back to top Go down

air in the nozzle Empty Re: air in the nozzle

Post  liteglow Tue Aug 24, 2021 6:17 am

Many users have drilled a tiny hole in the top of the nozzle to bleed out air.

liteglow
liteglow
Admin

Posts : 523
Join date : 2009-04-02
Age : 42
Location : Norway

https://laminar.forumotion.com

Back to top Go down

air in the nozzle Empty Re: air in the nozzle

Post  elbii Tue Aug 24, 2021 6:41 am

ok, and where? below the nozzle or at the side and what did you done

elbii
Nozzle Newbie
Nozzle Newbie

Posts : 3
Join date : 2021-08-18
Location : cologne germany

Back to top Go down

air in the nozzle Empty Re: air in the nozzle

Post  liteglow Tue Aug 24, 2021 6:52 am

On the top of where the air bubble collects.

I got new nozzles now. I did buy 1 pair from China Smile
With RGB led and Shutter.
They works like a charm.
liteglow
liteglow
Admin

Posts : 523
Join date : 2009-04-02
Age : 42
Location : Norway

https://laminar.forumotion.com

Back to top Go down

air in the nozzle Empty Re: air in the nozzle

Post  elbii Tue Aug 24, 2021 6:58 am

above was clear to me, but at what point, on the side or under the nozzle. ah ok I've already thought about it, but how expensive are they and does it work with the shipping to germany ?

elbii
Nozzle Newbie
Nozzle Newbie

Posts : 3
Join date : 2021-08-18
Location : cologne germany

Back to top Go down

air in the nozzle Empty Re: air in the nozzle

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum