The Laminar Project Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Programm to assess the jumper!? I need some information from you!

2 posters

Go down

Programm to assess the jumper!? I need some information from you! Empty Programm to assess the jumper!? I need some information from you!

Post  matthias Thu Dec 31, 2009 3:36 am

Hi, i created a programm with which i will calculate the perfekt dimensions of a nozzle by some permises.

But at first, i have to compare the results with the reality. So i need some experience from you.
For the comparison i need the follow facts from your jumper:
-diameter of the tube
-diameter of the nozzle

-width of the stream (when the stream begins to splash)
-angle of the jumper (between nozzle-axis and ground)

When my programm works good, i should get the same results as you.
If it works, i can share this programm.

But at first, i need the known infomation from you.

Thank you for your help and a happy new year ;-)

Matthias

matthias
Nozzle Newbie
Nozzle Newbie

Posts : 9
Join date : 2009-08-30
Location : Germany

Back to top Go down

Programm to assess the jumper!? I need some information from you! Empty Re: Programm to assess the jumper!? I need some information from you!

Post  John Mon Jan 04, 2010 2:46 pm

Currently my nozzle is in the rebuild phase. As soon as I get my nozzle up and running I will get that data for you. FYI, my setup has the nozzle exit about 18" above ground, and the water splashes at ground level so you will have to account for that.
John
John
Nozzle Master
Nozzle Master

Posts : 450
Join date : 2009-04-03
Age : 45
Location : Utah

http://www.mad-laboratory.com

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum