The Laminar Project Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.
The Laminar Project Forum

The forum for help and info about making Laminar Nozzle :-) Share and be happy..


OASE Rainbow Star

The Laminar Project Forum :: Laminar Nozzle talk and pictures

Go down

OASE Rainbow Star Empty OASE Rainbow Star

Post  Werner_tom Tue Jun 30, 2009 4:56 am

Hi,

i have found in the Oase Part list
http://www.oase-livingwater.com/wg/data/media/downloads/ersatzteilkatalog_2009.pdf

a small technical draw from the Rainbow Star laminar nozzle.
Anybody knows, how it works?

how works the Cutter?
where the water goes out, when the beem is cutted
in the description of the Nozzle, oase said, it can install outside of the pond, without a tank??

PS: my test with the bented tube is failed grrrrrrr........

Werner_tom
Nozzle Newbie
Nozzle Newbie

Posts : 7
Join date : 2009-06-24
Age : 53
Location : Heideck Germany

Back to top Go down

OASE Rainbow Star Empty Re: OASE Rainbow Star

Post  Werner_tom Tue Jun 30, 2009 12:01 pm

ok, i does not read the manual correctly.
the OASE Rainbow must stand into the pond or tank. The nozzle have a bybass for the water when the beam is cutted.

Werner_tom
Nozzle Newbie
Nozzle Newbie

Posts : 7
Join date : 2009-06-24
Age : 53
Location : Heideck Germany

Back to top Go down

Back to top

- Similar topics

The Laminar Project Forum :: Laminar Nozzle talk and pictures

 
Permissions in this forum:
You cannot reply to topics in this forum